Click image to view full size image
Here is 4.5 inch grinding wheel, the grinding wheel is made of high quality aluminum oxide grains. It is specially used for grinding metal, It has an advantage of durability and efficient.
SALI 115x3x22.2mm grinding wheel with 2 nets | |
Promotion Restriction: |
Not eligible for promotion for promotion |
Arbor Hole size: |
7/8", 22.2mm |
Abrasive Wheel Diameter: |
4.5", 115mm |
Series: |
Metal |
Ideally Used With: |
Angle grinder |
Item: |
Cut-off wheel 4-1/2"x1/8"x7/8", PK25 |
Packing: |
5pcs each plastic bag; 25pcs each colorful inner box; 200pcs each colorful carton |
Mini order: |
1 carton each style |
115x3x22.2mm grinding wheel, we sell more to Middle east and South America market.
Question: Why does the grinding disc become soft?
Answer:
1. The product itself is soft (the exhaust gas is not exhausted completely during the curing process).
2. Improper storage causes the product to get damp.
3. Product deformation. During the cutting process, the cutting surface is curved. As the cutting depth increases, the lateral stress on the grinding wheel increases, and the grinding wheel is cut repeatedly to produce cracks and cause "soft".
4. The operator exerts too much or too much force, causing the friction between the product and the workpiece to be greater than the internal stress of the product, and the internal stress is destroyed, causing the product to soften.
Normally we divide into 3 styles: the first one is Conventional as blue trademark, and the grinding disc product is black sand.
The second one is sharp type: blue trademark, the grinding disc product is red sand, and it is also suitable for stainless steel workpieces.
The third one is durable type or special grade: red trademark, grinding disc product is red sand, and at the same time add half a mesh.
http://www.sali-group.com/